POLACRYL 320
Water-based wood protective varnish
POLACRYL 320 is a high-quality hybrid acrylic water-based varnish which protects and enhances your wood. It is odourless and, thus, ideal for use on interior wood. Its hybrid composition allows for excellent results also on exterior wood. Its special composition fully prevents the development of mould and fungi on its film. This varnish has water repellent properties and excellent elasticity. It does not flake off, blister or crack. It highlights wood grains enhancing wood’s natural beauty. It offers strong protection against harsh UV radiation, rain and humidity. Indispensable for new or bare wood. Suitable for use on doors, windows, window frames, wooden lining, pergolas and any wooden surface.
- protects and enhances wood
- highly penetrating - non chipping
- reinforced protection with UV filters
Preparation
Surfaces must be clean, free of resins, tree resin, oil, old weathered coatings and dust. Sand surface smooth using the right sandpaper for the task.
► General:
For extra wood protection, apply 1 coat of colourless wood preservative POLACRYL 321 before application of POLACRYL 320.
► New wood:
Apply 1 or 2 coats of POLACRYL 320.
► Previously varnished wood:
Remove varnish in poor condition. Sand surface and apply 1-2 coats of POLACRYL 320.
Use
► Stir well before use.
► Sand surface smooth with the right sandpaper for the task before painting.
► Do not apply when temperature is below 5ºC, above 35ºC, when relative humidity is above 80% and wood moisture content is above 18%.
Drying out - Coverage
Drying times are dependent on ambient temperature and film thickness.
Touch dry: 1-2 hours
Recoat: 4-6 hours.
Practical coverage: 8-16m²/lt depending on the thickness of each coat and the surface porosity.




Reviews
There are no reviews yet.