EN 
EL 
DECONYL FLAT
interior emulsion paint
DECONYL FLAT is emulsion paint suitable for interior surfaces. Suitable for plaster, gypsum board, concrete, brick, etc. after careful surface preparation. This low sheen emulsion paint covers imperfections on walls efficiently offering a uniform finish. An easy to use paint with high coverage. Provides a smooth velvet finish. Being ammonia-free, this paint is practically odourless. Ideal for your home, hotels, offices.
- excellent coverage
- high hiding power
- exceptionally uniform matt finish
- withstands frequent washing
Preparation
Carefully prepare surface to obtain good results. Surface must be clean, dry and free from defective or non-cohesive material, dust, oils and salts
►Surfaces in sound condition:
Apply 2 coats of DECONYL FLAT.
► New plaster, concrete, brick, cement:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of DECONYL FLAT.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL FLAT.
► New gypsum board or putty:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of DECONYL FLAT.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL FLAT.
► Old water-based or lime paints:
Prime with FERM (H2O) αραιωμένο έως και 50% με νερό. Εφαρμόζουμε 2 στρώσεις DECONYL FLAT.
Use
Roller, brush or spray airless. Thin by 10-20% with water.
► Stir well before use and during application
► Allow newly poured concrete to cure for 30 days, then prime with FERM (H2O)
Drying out - Coverage
Drying times are dependent on ambient temperature and film thickness.
Touch dry: 1-2 hours
Recoat: 2-4 hours
Practical coverage: 9-13m²/lt depending on the thickness of each coat and the surface porosity.
Reviews
There are no reviews yet.